Optimum solutions for
disinfection and sterilization
HOTLINE RUSSIAN FEDERATION: 8 (800) 250-01-05 WORLDWIDE: + 31 6 48 555 464
 
Home
/
PRODUCTS
/
Trolley washer disinfectors
/
DGM T-2500
DGM T-2500
DGM T-2500
Zoom

Despite its small size, DGM T-2500 is a complete and multipurpose washing and disinfection device.It is available in two main versions for thermal disinfection or chemical disinfection.

Thermal disinfection version

In a typical CSSD area, a market standard size trolley washer may not fit in some installation layouts. The footprint of DGM T-2500 is reduced up to 50% when compared to a conventional size trolley washer, and is easy to install for floor level loading with a reduced pit of only 110mm / 4.33" depth.This device is mainly aimed to treat instrument containers and lids, o.t. shoes, plastic crates and other bulky items with dedicated presentation racks. It can also be equipped with a trolley connection mainfold which allows the water connection for those trolleys provided with spray arms and injection systems. This special option allows the validated treatment of surgical instruments and items with hollow surfaces, extending the trolley washer function range by making it a flexible device that can face CSSD throughput peaks as well as a safe productivity back-up.

Chemical disinfection version
Assuring the complete treatment of different items in a very short cycle time (10 minutes only).This configuration is aimed to the treatment of hospital furniture and other items such as medicinal transport trolleys, bed heads, clogs and wheel chairs which are normally treated without a validated process.The small size of of the DGM T-2500 system grants its use directly inside the ward. In this way, operators save time and the treated furniture are immediately available. The automatization of the washing process is the answer to the operators and patients safety demand since avoids the manual treatment and grants the process reproducibility and traceability. In this configuration washing and rinsing circuits are completely separated.


Overview
Technical data
Options

Key features(thermal disinfection version):

The machine is available in single door or double door pass-through versions.

  • Double glass hinged door (HST) for easy process visual inspection.
  • Washing chamber made of stainless steel AISI 316L mirror polished.
  • External body made of stainless steel AISI 304.
  • Washing and DI water temperature fully adjustable up to 93C/199F with independent temperature monitoring.
  • Vertically installed self flush stainless steel pump.
  • Washing pump pressure control.
  • Electrical heated 37.1 kW total power, 400V/3~+N/50Hz, other electrical connections available as optional.
  • Powerful drying unit, 1300 m3/h flow.
  • Standard automatic liquid dispenser provided with flowmeter and level control.
  • Touch screen control panel.

Chemical disinfection version (on request)


Type

Measure

Value

Number doorspcs1/2
External dimensions
- Widthmm1750
- Depthmm1620
- Heightmm2460

Internal dimensions

- Widthmm1100
- Depthmm1500
- Heightmm 1882
Chamber active capacitylt3105
Power suuply, kW37,1
Electro supplyV/Hz400 3 ~, 50



Main optional features
  • Cold water connection
  • 2nd chemical dosing pump
  • HEPA H14 air filters
  • Trolley loading/unloading ramps
  • Warm water connection
  • Conducibility sensor
  • Steam condenser
  • SteelcoData supervisor software
  • Steam heating pre-heating tanks
  • Drain pump system
  • Exhaust air fan
  • Bar code reader
  • Trolley connection manifold
  • Drain cooling system
  • Light into the chamber
  • Analogic sensor on washing circuit for pressure check (registered data)
  • Built-in printer for cycle validation and traceability
Copyright © 2006 - 2015
DGM Infection Control Systems