Optimum solutions for
disinfection and sterilization
HOTLINE RUSSIAN FEDERATION: 8 (800) 250-01-05 WORLDWIDE: + 31 6 48 555 464
Flexible endoscopes reprocessing and storage
DGM FS-1 Flexible Endoscope Reprocessor
DGM FS-1 Flexible Endoscope Reprocessor
 DGM FS-1 Flexible Endoscope Reprocessor

The DGM FS-1 is a new endoscope reprocessor made by people for people. Our main point is safety for patients, staff and endoscopes.

As the use of endoscopes increases, so does the risk of infections linked to endoscope reprocessing. This is indeed an area where zero tolerance towards cross-contamination must be maintained. By the design and development of our new automated Endoscope reprocessor we minimize risk contamination.

Technical data

Main features:

  • The DGM FS-1 is able to reprocess flexible endoscopes of all types and brands such as gastroscopes, colonoscopes, duodenoscopes, video and fiber enteroscopes
  • Our control system is user friendly and easy to use
  • Open system (it is possible to use any chemical products intended for endoscope reprocess system)
  • Compatible and tested with peracetic acid (cold disinfection) and glutaraldehyde
  • Leak test at the beginning of the cycle
  • Integrated sterile air filter (0.2 m) for channels purging and drying
  • Final rinse with sterile water: the microbiological filtration system
  • Process documentation through the external printer
  • Fast cycle time for quick endoscope turnaround
  • Cycle parameters changable
  • Automated alcohol flush and air dry
  • Audible and visual alarms for reprocessing cycle deficiency
  • Assures patient and operator safety
  • Cycle customization meets specific reprocessing needs
  • Compatible with all current models of endoscopes, including those with elevator wire channels
  • Printed documentation of all reprocessing cycle data
  • For use with most FDA-cleared reusable high-level disinfectants

Applicable scopes



1 scope per basin

Tank capacity

Detergent 1 L, Disinfectant 15 L, Alcohol 1 L

Visual Leakage Test

Bubble detection during immersion

Washing (detergent) method

Exterior surfaces

Multi-channel jetting system rotated in 3600 arc

Channels interiors

Fluid flushing cleaning

Disinfection method

Exterior surfaces

Disinfectant solution immersion

Channels interiors

Disinfectant solution flushing and filling

Working process

Washing time

0 ~ 10 min

Disinfection time

0 ~ 60 min

Alcohol Flushing Time

5 sec

Temperature setting

150C ~ 500C


550(W) * 585(D) * 950(H) mm


75 kg

Electrical requiremens

220/230/240 V~; 50/60 Hz

Copyright © 2006 - 2015
DGM Infection Control Systems